Sony Oxford Transient Modulator Pro Tools LE
Sony oxford transient modulator plug-in for pro tools le systems

Sony Oxford Transient Modulator Pro Tools LE Overview:

The Sony Transient Modulator is an application that allows dynamic level of signals to be modified by the transients in the programme material over time. The effect is to bring transient events in the programme forwards, or push them into to the background, such that the attacks of instruments can be accentuated or softened depending on settings.

The application was developed to address the common situation where there is a need to selectively tighten up percussive instruments or soften the unwanted percussive effects of acoustic musical instruments. Such effects are easily achieved with the Transient Modulator because its purpose-designed adaptive processing acts on differential information in the programme so that the overall long-term programme level is minimally affected and sensitivity to control parameters is drastically reduced. 
 
Sony Oxford Transient Modulator Pro Tools LE Key features:

• Radically change the dynamics of instruments.
• Accentuate or flatten attacks and transients.
• Bring sounds forward or push them back.
• Increase or reduce the effects of ambience.
• Produce rounded and dynamic percussive effects.
• Harden up and give life to dull or flat-sounding recordings and mixes, without the    unwanted changes in overall timbre associated with multi-band compression    techniques.
• Variable harmonic enhancement for extra loudness, presence and 'punch'.
• Increase overall modulation potential by the reduction of very short peaks

Sony Oxford Transient Modulator Pro Tools LE System Requirements

Sony Oxford Transient Modulator Pro Tools LE MAC OSX Requirements

• 384 MB minimum, 512 or higher recommended
• More RAM increases overall system and Pro Tools performance
• 512 MB RAM or higher suggested for sessions with high edit density, extensive use of plug-ins, or simultaneous use with MIDI sequencers
• OS X does not require minimum or preferred RAM settings for Pro Tools as RAM is dynamically allocated

Sony Oxford Transient Modulator Pro Tools LE MAC OS9 Requirements

• 192 MB minimum, 256 MB recommended. More RAM increases overall system and Pro Tools performance.
• Pro Tools LE application "Preferred" memory allocation set to 40 MB
• DAE "Preferred" memory allocation set to 30 MB
• Additional RAM required for simultaneous use with MIDI sequencers
• Virtual memory is not supported

Sony Oxford Transient Modulator Pro Tools LE WINDOWS Requirements

• Windows XP Professional or Home Edition
• Service Pack 1 or 2 Required*
• 384 MB minimum RAM, 512 MB (or higher) highly recommended
• Intel chipset (with Intel processors)
• Pentium 4 or Xeon systems with HyperThreading technology must have "Intel
• HyperThreading" in the system BIOS disabled.
• VIA or NVIDIA nForce chipset (with Athlon processors)
• ATX motherboard
• CD-ROM drive for software install
• 4GB hard drive space dedicated for audio (minimum)